Meyer PolyHawk PV Honda (11 hp)
Polyhawk Insert Hopper Spreader PolyHawk PV Honda (11 hp)
Double tap to zoom
Spread Materials Where You Want It
With the Meyer Polyhawk’s two internal and four external baffle adjustment systems, you will place the material in the right place, every time. Whether you want to spread four feet to the left, four feet to the right, or spread a 30-foot pattern, you can easily adjust the spreading pattern to meet your unique demands. In addition, the Polyhawk is engineered to handle virtually any material you can throw at it including salt, sand and salt/sand mix.
In Snow and Ice Control, High Performance is Mandatory
Our no-tools-required top screen breaks up large clumps of material that can cause damage to the drag chain and reduce performance.
The Polyhawk's Inverted-V helps prevent material from bridging and slowing down the conveyor.
Who Has Time for Downtime?
We designed the Polyhawk to be easy and simple to maintain while providing years of trouble-free use. Some of the key built-to-last features found in the Polyhawk line include:
- Rotationally molded polyethylene hopper provides years of service and is backed by an industry leading 10-year warranty.
- Slot and Tab design allows a more precise fit thereby delivering consistent reliability over the course of ownership.
- The highest tensile strength drag chain in the industry for consistently pulling all types of materials through the spreader
- Grease zerks at all critical points to keep your investment up and running
- Marine-grade actuator protects the spreader’s inner workings from the elements and keeps you spreading, even in the harshest conditions.
- Stainless steel external baffle adjustment rods prevent the baffles from seizing and remaining stuck in one location.
- Largest-in-the-industry 13-inch spinner disc with 1-inch shaft, spreads material from four feet to forty feet.
Ease of Use
Be Ready at a Moment's Notice
Meyer Polyhawks install in almost any pickup truck with 6' or 8' bed. Wireless controllers for gas-driven Polyhawks are standard. This means no wires running underneath your vehicle and no drilling holes in your cab to mount a controller. Simply load your spreader in the back of your truck and you’re ready to spread.
Type: Insert hopper
Vehicle: 3/4-to-1 ton pickup trucks
Length: 6-feet & 8-feet
Capacity: 1.5 cubic yards, 2.0 cubic yards
Materials: Salt, 50/50 salt-sand, sand
|Part #: 63899||Hopper Width:50"
|Total Height:N/A||Spread Width (min-max):4' - 30'
||Empty Weight:850 lbs
||Max Capacity Load:2.0 cu yd
|Max Capacity Weight:5400 lbs
||Spreading Material: Sand, Salt Mixed||Warranty: 1 Year||Hopper Material: Poly|
||Spinner Material: Poly||Tire Diameter: N/A||Frame Material:|