Horsepower
110 - 140 HP
Transmission
Mechanical or Power Shuttle
Operator Environment
Cab or Non-Cab
Compatible Loaders
L103 / L104 Series Loaders
Case IH Farmall® 140A
Features
Engine
All the Horsepower You Need with No Regeneration
Equipped with a 4-cylinder 4.5 liter FPT engine, these new electronically-controlled and Tier 4 B/Final compliant engines provide operators with faster throttle response, improved cold weather starting, increased fuel efficiency, and quieter operation. Unlike some competitive utility tractors, Farmall 100A series tractors do not require a diesel particulate filter in order to avoid downtime and increase productivity with no regeneration.
Learn More About No Regeneration
Transmission
Smooth Shifting Options to Match Your Needs
Choose from three transmission options to best suit your operation:
- 8×8 clutchless power shuttle (standard)
- 8×8 Synchro mechanical option with mechanical reverser
- 16×8 power shuttle with hi-lo gear selection in every range
Operator Environment
Comforts to Make Long Days Seem Shorter
Hundreds of hours of research go into making long days seem shorter, controls seem more natural and chores seem less challenging in Case IH equipment. Farmall 100A series tractors continue the long-standing Farmall commitment, putting a high priority on operator comfort and productivity.
Comfort
Climate-Controlled: Keeping the elements out while delivering the visibility you need to get the job done is what the Farmall 100A series cab platform is all about.
Contoured Seat: Enjoy the contoured seat which comes standard with the Farmall 100A. Optional air suspension seat with 15 degree swivel also available.Convenience
Integrated Joystick: Our loader joystick comes standard from the factory and is integrated into the right-hand console for easier operation and greater productivity.
Two Door Entry: Two doors provide easy accessVisibility
Curved Window Frame: Our curved window frame increases loader visibility and provides outstanding overall visibility at a lower base investment.
High Visibility Roof Panel: The optional high visibility roof panel allows the operator to see full-range loader operation while the sloped hood provides superior forward visibility — all for increased productivity.
Hydraulics and Hitches
Lift Heavy Loads with Confidence
Farmall 100A series tractors come equipped with a three-point hitch with a lift capacity of 7,200 pounds. Plus, the 22 GPM hydraulic flow capacity allows you to lift heavy loads with ease.
Connect implements quickly and easily with two standard-equipment, deluxe remotes with flow control and breakaway couplers. Easily add two more remotes as needed.
Connect implements quickly and easily with two standard-equipment, deluxe remotes with flow control and breakaway couplers. Easily add two more remotes as needed.
Maintenance and Uptime
Maximize Your Time Behind The Wheel With Minimal Time Under The Hood
Farmall 100A series tractors are engineered with rugged Case IH components proven to provide years of reliable service. Case IH quality replacement parts, maintenance programs and service expertise are designed to boost equipment efficiency and protect your investment – season after season.
Loaders and Attachments
Always Have the Right Tool for the Job
Tackle your toughest jobs with Case IH L104 series loaders, specifically designed to match Farmall 100A series tractors. They install and remove in minutes, and allow you to switch easily between attachments – no tools required.
See All Compatible Loaders
L103 Loader (For 2WD Models)
Specs:
- Lift Capacity Max Height @ pivot pins: 2,866 - 3,836 lbs (1,300 - 1,740 kg)
- Boom Breakout Force @ pivot pins: 3,792 - 4,982 lbs (1,720 - 2,260 kg)
- Raise time: 2.2 - 5.1 seconds
Compatible With Farmall utility 100A series 2WD models
L103 LoaderL104 Loader
Specs:
- Lift Capacity Max Height @ pivot pins: 3,395 - 4,079 lbs (1,540 - 1,850 kg)
- Boom Breakout Force @ pivot pins: 4,409 - 5,247 lbs (2,000 - 2,380 kg)
- Raise time: 5.6 - 6.4 seconds
Compatible With Farmall 100A series tractors
L104 LoaderAttachments & Implements
Your Case IH dealer offers a full line of loader attachments and tractor implements to help you get the most productivity from your tractor. Implements are quick and easy to hook up and include front-, mid- and rear-mount options, ranging from material handling loader attachments to mowers, rotary tillers, snow blowers and more.
Tractor Attachments & Implements >
Download Implements Compatibility Chart >
Loader Attachments >
Engine Performance | |||||
| Advertised Engine Power, Rated, hp (kW) | 140 (104) | ||||
|---|---|---|---|---|---|
| Maximum Engine Power, hp (kW) | Same as advertised | ||||
| Rated Engine Speed, rpm | 2200 | ||||
| Power Boost, hp (kW) | No boost | ||||
| Fuel Tank capacity, gal (L) | 56.8 (215) | ||||
| Diesel Exhaust Fluid (DEF) tank capacity, gal (L) | 7.9 (30) | ||||
PTO Performance | |||||
| PTO Horsepower, Basic / Optional Transmission, hp (kW) | 115 (86) | ||||
| PTO Speeds, rpm | 540 / 1000 | ||||
| PTO operational Type (Independent; Live; Continuous) | Independent | ||||
Basic Engine | |||||
| Engine Make | Case IH FPT | ||||
| Engine Model | 4.5 L | ||||
| Number of Cylinders | 4 | ||||
| Displacement, cu in (L) | 274 (4.5) | ||||
| Engine Bore, in (mm) | 4.095 (104) | ||||
| Engine Stroke, in (mm) | 5.20 (132) | ||||
| Block Design, Replaceable Liners | Parent bore block | ||||
| Aspiration, Turbocharged or Naturally Aspirated | Turbo-intercooled | ||||
Fuel System | |||||
| Fuel System Description | High Pressure Common Rail | ||||
| Fuel System Control, Electronic or Mechanical | Electronic | ||||
| Fuel Injection to combustion chamber, Direct or Indirect | Direct | ||||
Emission and Exhaust Treatment | |||||
| Emission Level, US EPA Tier | Tier 4B / Final | ||||
| Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) | SCR with DEF | ||||
| Exhaust Gas Recirculation (EGR) | No | ||||
| Cleanup Catalyst (CUC) | CUC standard | ||||
| Diesel Oxidation Catalyst (DOC) | DOC standard | ||||
| Diesel Particulate Filter (DPF) | No | ||||
| Exhaust Pipe, Vertical stack or Horizontal | Vertical stack | ||||
Cooling System | |||||
| Fan Drive Type | Belt | ||||
Electrical System | |||||
| System Rating, Volts | 14 | ||||
| Alternator Rating, Amps | 120 std.; 200 opt. | ||||
Basic Transmission Configuration | |||||
| Manufacturer's Description | 8Fx8R Power Shuttle | ||||
| Transmission Type | Hydraulic Power Shuttle | ||||
| Number of Forward / Reverse Speeds | 8F / 8R | ||||
| Maximum Speed Forward, mph (kph) | 18.6 or 25 (30 or 40) | ||||
| Creeper Range Available | Optional for all transmissions | ||||
| Shuttle (Forward-Reverse) Available | Standard, w/ left hand shuttle lever | ||||
Optional Transmission 1 | |||||
| Manufacturer's Description | 16Fx8R Power Shuttle | ||||
| Transmission Type | Hydraulic Power Shuttle w/ Hi-Lo | ||||
| Number of Forward / Reverse Speeds | 16F / 8R | ||||
Optional Transmission 2 | |||||
| Manufacturer's Description | 8Fx8R Mechanical Shuttle | ||||
| Transmission Type | 2 ranges, 4 speeds/range | ||||
| Number of Forward / Reverse Speeds | 8F / 8R | ||||
Wheel or Track Configuration | |||||
| Drive Wheels or Tracks; 2WD,4WD, 2WD / 4WD, 2 Tracks or 4 Tracks | 2WD / 4WD | ||||
| Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer | Front Steer | ||||
Rear Axle Assembly | |||||
| Final Drive Location and Description | Inboard planetary | ||||
| Axle Output End, Flange or Bar | Flange standard; bar optional | ||||
| Axle Bar Diameter, in (mm) | 3.071 (78) | ||||
Front Axle | |||||
| Suspended Front Axle Available | No | ||||
Brakes | |||||
| Service Brake Type | Wet disc | ||||
Hydraulic System | |||||
| Hydraulic System Type | Open center system, CCLS remotes | ||||
| Main Hydraulic Pump Type | Fixed displacement pump | ||||
| Implement Pump Flow, gpm (Lpm) | 22 (83) | ||||
| Optional Pump Flow, gpm (Lpm) | No option | ||||
| Number of Standard Remote Valves | 2 std; 3 or 4 opt | ||||
3-Point Hitch Features | |||||
| 3-Point Hitch Category | Category 2 | ||||
| Optional Hitch Category | No option | ||||
| Draft Sensing or Lift Control | Draft sensing, top link | ||||
| Draft Link Ends Telescopic | Yes | ||||
3-Point Hitch Lift Capacity | |||||
| Standard Lift Capacity 24 Inches behind pin, lb (kg) | 7,200 (3266) | ||||
| Optional Lift Capacity 24 Inches behind pin, lb (kg) | 5,400 (2449) | ||||
| Standard Lift Capacity at lift pin, lb (kg) | np | ||||
| Optional Lift Capacity at lift pin, lb (kg) | np | ||||
Drawbar | |||||
| Drawbar Description | Swinging, extendable, Category 2 | ||||
Wheelbase / Trackbase | |||||
| Wheelbase, 2WD, in (mm) | 95.7 (2432) | ||||
| Wheelbase/Trackbase, MFD/4WD or Track, in (mm) | 103.9 (2640) | ||||
Length | |||||
| Length, 2WD, incl. Hitch/Drawbar, in (mm) | np | ||||
| Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) | 184.6 (4690) | ||||
Vertical Dimensions | |||||
| Height to Top of Cab, in (mm) | 110 (2800) | ||||
| Height to Top of ROPS raised, in (mm) | 117.3 (2980) | ||||
Width w/Tires or Tracks | |||||
| Overall Width, with standard wheels or tracks, in (mm) | 74.5 (1893) at fenders; 98 (2490) bar axle ends | ||||
Weight (w/Tires or Tracks) | |||||
| Weight, 2WD w/ROPS, lb (kg) | 9,660?(4382) preliminary | ||||
| Weight, MFD/4WD w/ROPS, lb (kg) | 10,225 (4638) preliminary | ||||
| Weight, 2WD w/Cab, lb (kg) | 10,040 (4554) preliminary | ||||
| Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) | 10,605 (4810) preliminary | ||||
| Weight, Total allowable, w/maximum ballast, lb (kg) | 12,700 (5761) preliminary | ||||
Tire / Track Size | |||||
| Front Tire Size, 2WD | 10.00-16, 8 ply, F2 | ||||
| Front Tire Size orTrack Width, MFD/4WD or Track | 13.6 R28, R1W | ||||
| Rear Tire Size or Track Width | 18.4 R34, R1W; Duals available w/bar axle | ||||
Sales Literature | |||||
| Literature Number | TA-1546-18 | ||||
| Literature Date | October, 2018 | ||||
Secondary Literature Source | |||||
| Secondary Literature Number | TA-1406-14 | ||||
| Secondary Literature Date | October, 2014 | ||||
Other Documentation | |||||
| Document Number | -- | ||||
| Document Date | -- | ||||
Status and Entry Dates | |||||
| Manufacturing Status, Current or Archive | Current | ||||
| First Entry Date | 10/25/14 | ||||
| Revision Date | 10/29/18 | ||||