Case IH 3162 Draper Head

Double tap to zoom

 

Features

TERRAFLEXTM CUTTERBAR

Harvest More of What You Grow

The advanced ground following capabilities of the Case IH 3162 Series II TerraFlextm draper cutterbar allows you to harvest low podded crops with minimal waste, no matter what the terrain.

Versatility

The TerraFlextm cutterbar features a flexible range of movement, 3 inches up and 3 inches down for a total of 6 inches differential. Choose the tension to match field conditions, whether muddy and soft or dry and hard. The TerraFlex cutterbar can also be locked into a rigid position for harvesting tall crops. The optional Auto-Header Height Control can be used when in rigid position.

Make Adjustments From the Comfort of the Cab

Optional in-cab cutterbar adjustment allows the operator to fine-tune cutterbar pressure on-the-go to match field conditions. Additionally, cutterbar flotation, featuring air-bag suspension design, can be adjusted from inside the cab.

Exclusive TerraFlextm Torsion Block

The TerraFlextm cutterbar tension is controlled using a simple rubber torsion block that provides consistent response through the full range of cutterbar travel. The torsion arms can be adjusted individually to fine tune cutterbar pressure.

KNIFE DRIVE

Improve Performance Across the Cutterbar

The CentraCuttmcenter-mounted knife drive improves performance and minimizes cutterbar vibration. The head is driven from the center, eliminating gear boxes on the ends of the header and allowing for much narrower dividers, reducing crop knock down.

Strength and Stability

The CentraCuttm center knife drive features a heavy-duty knife head and offers 2X the cutting force as dual wobble box and 3X the cutting force as a single wobble box. Helical cut gears ensure that the cutter bar never falls out of timing. If the knife drive becomes plugged, it is fully reversible from inside the cab. CentraCuttm has improved dirt evacuation flap and seals .

Adjustability

The CentraCuttm is a hydraulically driven mechanical drive, with adjustable knife speed on the back side of the header. This well-balanced knife drive is driven from the center, eliminating the need for a double knife drive.

REEL

Versatile Reel Reduces Crop Loss In Any Field Condition

The cam action reel found on all Case IH 3100 Series II draper heads positively engages then gently lifts the crop over the cutterbar and across the draper belt floor, reducing reel shatter. For different crop conditions the cam timing can easily be changed to provide different reel tine angles. In 2019, reel anti-wrap kits are standard equipment on all Series II draper heads. Additionally, the reel drive motor and reel travel, tine shape and design have all been upgraded.

DRAPER BELTS

High Capacity Draper Belts Maximize Yield

The two side belts and two center belts gently convey the crop across the draper floor and into the feeder house so that the heads of the plant are always feeding first. 3100 Series II draper heads use WCCO belts for superior performance. Wide belts match the capacity of the combine. A Seed Saver Channel on the bottom edge of the draper belts allows the grain to be pulled in to the combine instead of being lost. If the draper belt is damaged, it can be serviced rather than replaced.

Specifications

Make Case IH
Model 3162 TerraFlex
Draper Header  
Cutting width, ft in (m) 30, 35, 40, 45 (9.14, 10.67, 12.19, 13.72)
Rigid or Flex Flex
Vertical Flex Range, in (mm) 6 (154)
Automatic Header Height Control Standard
Gauge / Stabilizer wheels Optional 35' and wider
Low Speed Transport Optional, hydraulic deploy
Sickle Cutterbar  
Single or double knife Dual opposing knives
Knife width 3 (76)
Knife drive CentraCut center mounted drive
Knife speed, strokes per minute Up to 2 x 630 = 1260
Reel  
Number of bats or tine bars 6 tine bars
Tine material Plastic
Reel Diameter, in (mm) 42 (1070)
Reel speed, rpm 0 to 60
Draper and Infeed  
Cross Belt width, in (mm) 41.5 (1054)
Cross Belt speed, ft/min (m/min) 0 to 630 (0 to 192)
Center Infeed belt speed, ft/min (m/min) 630 (192)
Center Infeed belt width, in (mm) Two 41.5 (1054) = 83 (2108)
Infeed drum or auger diameter, in (mm) 26 (660)
Upper Cross Auger Optional
Weights  
Weight, 25' width, lb (kg) Width not offered
Weight, 30' width, lb (kg) 6,230 (2826)
Weight, 35' width, lb (kg) 6,730 (3053)
Weight, 40' width, lb (kg) 8,340 (3783)
Weight, 45' width, lb (kg) 9,930 (4504)
Sales Literature  
Literature number Case IH Spreadsheet
Literature date 12/1/2013
Other Documentation  
Document number 47450013
Document date 5/1/2013
Entry Dates  
Manufacturing status Current
First Entry Date 12/30/2013
Revision Date --

VIEW ALL OUR LAWN & GARDEN EQUIPMENT FOR SALE