Case IH Farmall 100N

Double tap to zoom

 

Features

Farmall N Platform

The platform on both Farmall N Cab and ROPS models is ISO mounted to reduce noise and vibration. Features include:

  • An ergonomic operator environment for long days in the seat
  • A tilt and telescoping steering column for optimal positioning and fatigue-fighting operation
  • A digital instrument cluster that monitors PTO and ground speed for accurate spraying and dusting operations

 

Non-Cab

Farmall N Non-Cab Models Feature:

  • An adjustable vinyl seat with operator's-presence sensor and retractable seat belts
  • A foldable mid-mounted roll bar that lets you maneuver under low-hanging vines

 

Cab

Farmall N Cab Models Feature:

  • Heating and air conditioning to keep you comfortable
  • Two external air filters that remove allergens and dust and provide a continuous supply of fresh air
  • Tinted glass for superior visibility
  • A deluxe cloth seat with operator’s-presence sensor and retractable seat belt for your safety
  • Two wide doors for easy access from either side
  • Front and rear windows that open fully
  • A rear cab access panel and separate access point to route harnesses or cables

 

Engine and Axle Options

Engine Options

All Farmall® N Series tractors are powered by a 4-cylinder Tier 4A-compliant diesel engine that's clean burning, fuel efficient and features:

  • 3.4 L (207 cu. ln.)
  • 19 gal (72 L) fuel capacity 

​​​

Axle Options

The Farmall 80N is available with 2WD or MFD axles. The Farmall 100N and 110N are MFD only

  • A 55-degree turn angle on both the MFD and 2WD axles provides maximum maneuverability in tight spaces
  • The standard differntial lock on rear axles provides added traction in slippery, tough conditions
  • Up to 11 degree axle oscillation provides smooth travel over rough terrain.​​

 

Transmissions

Transmission Options

Case IH offers two transmission options on the Farmall N Series tractors. Both transmissions provide:

  • More convenience and speeds than found on a typical utility tractor
  • Extra-slow speeds, including three gears below 1 mph (1.6 kph) for precise movement in tight quarters
  • Optional hydraulically engaged wet clutch for smoother performance
  • Digital ground-speed display ideal for spraying, fertilizing and planting

16 X 16 Standard Transmission

Standard 16x16 transmission with mechanical shuttle provides:

  • Four speeds in each of four ranges
  • The ability to shift from forward to reverse in any gear with a synchronized mechanical shuttle lever
  • A shuttle lever located on the left, freeing your right hand for other controls
  • A top speed of 17 mph (30 kph), depending on tires
  • An independent parking brake

32 X 16 Power Shuttle

Optional 32x16 Power Shuttle Transmission

  • Eliminates the need to clutch
  • Ideal for loader-intensive applications
  • Wet clutch pack helps extend the Power Shuttle life
  • The Power Shuttle control is located on the left side of the tilt/telescoping steering column, leaving your right hand free to work implement controls

Specifications

Make Case IH
Model Farmall 100N Narrow (2016-Present)
Engine Performance  
Advertised Engine Power, Rated, hp (kW) 98 (73)
Maximum Engine Power, hp (kW) Same as advertised
Rated Engine Speed, rpm 2300
Power Boost, hp (kW) No boost
Fuel Tank capacity, gal (L) 19 (72)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) No DEF
PTO Performance  
PTO Horsepower, Basic / Optional Transmission, hp (kW) 86 (64.1)
PTO Speeds, rpm 540/540E std.; 540/1000 opt.
PTO operational Type (Independent; Live; Continuous) Independent
Basic Engine  
Engine Make Case IH FPT
Engine Model 3.4 L
Number of Cylinders 4
Displacement, cu in (L) 207 (3.4)
Engine Bore, in (mm) 3.90 (99)
Engine Stroke, in (mm) 4.33 (110)
Block Design, Replaceable Liners Parent bore
Aspiration, Turbocharged or Naturally Aspirated Turbocharged, air-to-air aftercooled
Fuel System  
Fuel System Description High Pressure Common Rail
Fuel System Control, Electronic or Mechanical Electronic
Fuel Injection to combustion chamber, Direct or Indirect Direct
Emission and Exhaust Treatment  
Emission Level, US EPA Tier Tier 4A (Interim)
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) No
Exhaust Gas Recirculation (EGR) Cooled EGR
Cleanup Catalyst (CUC) No
Diesel Oxidation Catalyst (DOC) DOC standard
Diesel Particulate Filter (DPF) DPF standard
Exhaust Pipe, Vertical stack or Horizontal Horizontal
Cooling System  
Fan Drive Type Belt
Electrical System  
System Rating, Volts 12
Alternator Rating, Amps 120
Basic Transmission Configuration  
Manufacturer's Description 16x16 Mechanical Synchro Shuttle
Transmission Type 4 synchronized speeds in 4 non-synchro ranges
Number of Forward / Reverse Speeds 16F / 16R
Maximum Speed Forward, mph (kph) 19 or 25 (30 or 40)
Creeper Range Available 28x16 option
Shuttle (Forward-Reverse) Available Yes, mechanical shuttle
Optional Transmission 1  
Manufacturer's Description 16 x16 Power Shuttle
Transmission Type 4 synchronized speeds in 4 non-synchro ranges
Number of Forward / Reverse Speeds 16F / 16R
Optional Transmission 2  
Manufacturer's Description 32 x 16 Dual Command
Transmission Type Power shuttle w/ Hi/Lo
Number of Forward / Reverse Speeds 32F / 16R
Wheel or Track Configuration  
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks 2WD / 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer Front Steer
Rear Axle Assembly  
Final Drive Location and Description Planetary / Inboard
Axle Output End, Flange or Bar Flange
Axle Bar Diameter, in (mm) No bar axle
Front Axle  
Suspended Front Axle Available No
Brakes  
Service Brake Type Wet Disc
Hydraulic System  
Hydraulic System Type Open Center
Main Hydraulic Pump Type Gear, dual-pump
Implement Pump Flow, gpm (Lpm) 16.9 (64)
Optional Pump Flow, gpm (Lpm) 21.1 (80) cab only
Number of Standard Remote Valves 2 or 3 rear; 2 mid
3-Point Hitch Features  
3-Point Hitch Category Category 1 and 2
Optional Hitch Category No option
Draft Sensing or Lift Control Mechanical or electronic draft control
Draft Link Ends Telescopic Telescopic or claw style
3-Point Hitch Lift Capacity  
Standard Lift Capacity 24 Inches behind pin, lb (kg) 3,780 (1715)
Optional Lift Capacity 24 Inches behind pin, lb (kg) No option
Standard Lift Capacity at lift pin, lb (kg) 5,732 (2600)
Optional Lift Capacity at lift pin, lb (kg) No option
Drawbar  
Drawbar Description Swinging
Wheelbase / Trackbase  
Wheelbase, 2WD, in (mm) 96 (2438)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) 96 (2438)
Length  
Length, 2WD, incl. Hitch/Drawbar, in (mm) np
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) 148.8 (3779) w/ROPS; 159 (4035) w/cab
Vertical Dimensions  
Height to Top of Cab, in (mm) 91.7 (2329)
Height to Top of ROPS raised, in (mm) 90 (2287)
Width w/Tires or Tracks  
Overall Width, with standard wheels or tracks, in (mm) 52.9 to 53.4 (1342 to 1356)
Weight (w/Tires or Tracks)  
Weight, 2WD w/ROPS, lb (kg) 5,498 (2494)
Weight, MFD/4WD w/ROPS, lb (kg) 6,420 (2912)
Weight, 2WD w/Cab, lb (kg) 5,772 (2618)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) 6,292 (2854)
Weight, Total allowable, w/maximum ballast, lb (kg) 7,010 (3180)
Tire / Track Size  
Front Tire Size, 2WD 6.00-16, 8 PR F2
Front Tire Size orTrack Width, MFD/4WD or Track 7.50 R18, R1
Rear Tire Size or Track Width 14.9 R28; 380/85 R28, R1
Sales Literature  
Literature Number TA-1454-16
Literature Date 2/1/2016
Secondary Literature Source  
Secondary Literature Number --
Secondary Literature Date --
Other Documentation  
Document Number --
Document Date --
Status and Entry Dates  
Manufacturing Status, Current or Archive Current
First Entry Date 2/27/2016
Revision Date --

VIEW ALL OUR LAWN & GARDEN EQUIPMENT FOR SALE