The Revolution V-Box frame and drive support starts as high-grade Stainless Steel then it is sealed with an Automotive E-Coat Primer and finally finished with Military Grade Powder Coat - we are obsessed with quality.
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
The Revolution V-Box family has a roto molded perimeter with ribbed hopper, mounted to an all stainless steel frame and drive support.
The easy on/off stainless steel and roto molded chute has a 16" four flute poly spinner to provide you long life and superior spread pattern up to 30'.
The 1/2 horsepower direct drive gear box and 1/3 horsepower spinner motor are fully enclosed so that water and salt does not penetrate.
The inside of the poly hopper walls are designed for maximum flow of the toughest materials to minimize size material bridging.
One harness supplies all of the power from the battery to the hopper, with a water-tight Duetsch connector and seal to connect them. The harness is plug and play for accessories. No cutting or splicing.
Patented, adjustable inverted vee. Adjust the inverted vee system to match the material you want to spread.
Optional Wetting System with Filling Station available.
Military Grade Primer & Powder-Coat Paint Finish
Specifications
Model
RVB4300
Capacity
4.3 Cubic Yard
Empty Weight
905 LBS.
Overall Length (A)
133"
Body Side Length (B)
110"
Overall Height (C)
57"
Width
52"
Depth
127"
Spinner Motor
12 Volt, 1/3HP
Auger Motor
12 Volt, .6 HP
Spinner
16" Diameter Poly Four Flute
Recommended Use
Class 6 and 7
Chute* Easy On/Off
16" Short Chute, 29" Long Chute
Trough and Frame
High Rolled Steel, E Coat, Powder Coat
Vibrator
Standard
Second Vibrator
Standard
Stainless Steel Inverted Vee
Standard
Top Screen
Standard
Tie Down Brackets
Standard
Vinyl Tarp
Optional
Auxiliary Lights
Optional
Ratchet Straps
Optional
Control
RS Digital Control
Wetting System
Optional
* Choose a short or long chute for your RVB spreader (not included) Both long and short chute are approximately 30" wide.