Yanmar V8
Features
- Transverse-mounted diesel engine, high performance, minimized fuel consumption, low emissions
- Hydrostatic travel drive, high traction power, infinitely variable speed control by driving automatics, optimum driving performance in all ground conditions, wear-free braking
- Powerful hydraulics, high lifting and breakout forces
- Excellent parallel kinematics for synchronized parallel operation of bucket and forklift attachment over the entire lifting height
- Ease of operation, hydraulic pilot control, multi-function joystick for intuitive control
- Ease of serviceability, long maintenance intervals
Specs
| OPERATING DATA, STANDARD EQUIPMENT | |
| Operating weight (SAE J 1197) | 10,802 lbs (4,900 kg) |
| Tipping load, straight at full reach (ISO 14397-1) | 8,311 lbs (3,770 kg) |
| Tipping load, articulated at full reach (ISO 14397-1) | 7,341 lbs (3,330 kg) |
| Total length, bucket on ground | 16' 7" (5,060 mm) |
| Total width | 6' 1" (1,850 mm) |
| Turning radius at outside bucket edge | 13' 8" (4,160 mm) |
| Wheelbase | 6' 11" (2,100 mm) |
| Total height (top of cab) | 8' 8" (2,640 mm) |
| ENGINE | |
| Manufacturer, model | Deutz, TCD 2.9 L4 |
| Type | Turbo diesel engine with intercooler, exhaust-gas optimised, EPA Tier 4 Final / EC stage III B |
| Combustion | 4-stroke cycle, Common Rail injection |
| Number of cylinders | 4 in line |
| Displacement | 177 in3 (2,900 cm3) |
| Net power rating at 2,200 rpm (SAE J 1349) | 60 hp (45 kW) |
| Max. torque | 177 lb ft (240 Nm) @ 1,600 rpm |
| Cooling system | Water |
| ELECTRICAL SYSTEM | |
| Nominal voltage | 12 V |
| Battery | 12 V / 100 Ah |
| Generator | 14 V / 95 A |
| Starter | 12 V / 3.5 hp (2.6 kW) |
| Cold-starting aid | Glow plugs |
| Lighting system in compliance with US/ISO standards, H7 headlamps. | |
| POWER TRANSMISSION | |
| Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics, automatic optimisation and adjustment of drawbar pull and speed. Hydraulic motor power shift providing two speed ranges. Infinitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear axle via cardan shaft to front axle. Inching pedal for sensitive driving and stopping at high rpm. |
|
| "Low" | 0-3 / 0-6 mph (0-5 / 0-10 kph) |
| "High" | 0-10 / 0-22 mph (0-16 / 0-36 kph) |
| AXLES | |
| Rigid front axle with 35% limited slip differential. Oscillating rear axle with 35% limited slip differential. Center-mounted disc brake. |
|
| TIRES | |
| Standard | 405/70 R 18 SPT 9 Dunlop |
| BRAKES | |
| Service brake: | Hydraulically actuated center-mounted disc brake, acting on all 4 wheels via 4-wheel drive |
| Auxiliary brake: | Hydrostatic drive provides dynamic braking |
| Parking brake: | Mechanically actuated center-mounted disc brake on front axle |
| STEERING | |
| Articulated, 1 steering cylinder with final positioning damping on both sides, fully hydraulic through Load-Sensing priority valve, quick and easy steering even at engine idle-running speed. |
|
| Total steering angle | 80 deg. |
| FLUID CAPACITIES | |
| Fuel tank | 20 gal (75 l) |
| Hydraulic system (incl. tank) | 15 gal (55 l) |
| HYDRAULIC SYSTEM | |
| Max. pump capacity | 17 gpm (64 l/min) |
| Max. working pressure | 3,625 psi (250 bar) |
| Control unit: Proportional hydraulic valve with 3 control circuits, supplying work functions “Lift/Lower”, “Dump/Tilt-back with high-speed control” and “3rd control circuit (1st additional control circuit)”. Simultaneous, independent control of all movements. |
|
| Hydraulic cylinders: 1 lifting cylinder, 1 tilt cylinder, all dual-action | |
| The thermostatically controlled oil circuit ensures that the oil temperature is promptly reached and avoids overheating. Return filter installed in hydraulic tank allows for eco-friendly replacement of filter elements. |
|
| Fingertip control for 3rd control circuit, electro-proportional, oil flow limitation via machine function display, continuous operation. Installation on loader frame incl. couplings. |
|
| Hydraulically switchable float position by overdriving the pressure point “Lower” on the joystick, electrically switchable continuous operation function. |
|
| Single, four-way control lever (joystick) with integrated direction-of-travel switch and switch for additional control circuit. |
|
| LOADER FRAME | |
| Loader installation featuring true parallel linkage and hydraulic quick coupler | |
| General-purpose bucket (SAE J 742) | 1.05 yd3 (0.80 m3) |
| Lift capacity at ground level (SAE J 732) | 10,800 lbs (48,000 N) |
| Breakout force at bucket edge (SAE J 732) | 10,318 lbs (45,900 N) |
| FORK LIFT ATTACHMENT | |
| Operating load (SAE J 1197) over the total lift and steering range | 2,945 lbs (1,335* kg) |
| Operating load in transport position, above ground level, total steering range | 5,512 lbs (2,500* kg) |
| Width of fork carrier | 4' 1" (1,240 mm) |
| Length fork tines 4" x 1.8" (100 mm x 45 mm) | 3' 7" (1,100 mm) |
| Stability factor | 2 |
| Load center from fork attachment point | 22" (560 mm) |
| CAB | |
| Rubber-mounted full-vision steel cab, ROPS (EN ISO 3471) and FOPS** (EN ISO 3449) certified | |
| Cab featuring two doors, intermittent wipers and washer (front and rear), tinted panoramic safety glass, sliding window on left-hand side, sun-blind. |
|
| Driver’s seat MSG 85 (comfort version), with hydraulic cushioning, extra-high backrest, lumbar support, longitudinal and tilt adjustments, lap belt, in compliance with ISO 7096 and ISO 6683. |
|
| Cab heating with 3-speed heater fan (choice fresh air/recirculating air) and windshield defroster, front and rear. |
|
| Standard: Air conditioning. Back-up alarm for reverse travel. Battery disconnector. Guard for fan wheel and V-belt. Immobilizer, electronic, keypad operation. 2 working floodlights, front. 2 working floodlight, rear. Rear axle weights, approx. 575 lbs (260 kg). Steering wheel with height and tilt adjustment. |
|
| Cab exterior noise level | 101 dB (A) |
| Cab interior noise level | 75 dB (A) |
| Noise level values measured in compliance with Directive 2000/14/EC and EN474. *With rear axle weights **FOPS-approved only with skylight guard (optional) |
|