- Home
- Our Company
- Departments
-
New Equipment
- Build Your Own Case IH
- Case IH
- Mower and UTV Clearance
- Case Construction
- Cub Cadet
- Echo
- Ferris
- Gehl
- Great Plains
- Honda
- Hudson Brothers
- Kioti
- MacDon
- Meyer
- Precision Planting
- Rhino
- Scag
- Snow Ex
- Sno-Way
- Towmaster Trailers
- Unverferth
- Vortexx Pressure Washers
- Woods
- Yanmar
- Yanmar Construction
- More Product Lines
- Used Equipment
- Finance
- Specials
- Contact Us
Open tomorrow at 8:00 am
Case IH TD102
Pull-Type Disc Mowers TD102
Overview:
The Case IH TD102 pull-type disc mower features a smooth ride, clean cut, superior trailing ability and narrow transport width, plus easy tractor hookup using a simple clevis hitch.
Features
Superior Crop Flow
The Case IH TD102 pull-type disc mower features a modular cutterbar design for superior crop flow that reduces streaking and ensures quick mowing. The cutterbar is designed with:
- Shock protection to minimize repair expense
- Discs protected from internal gear damage by the drive hub
- Crop deflector shields located behind each end of the cutterbar to direct cut crop into a wide swath inside the tire path
- Two end discs that co-rotate to provide a narrower swath
- Able to adjust swath from 60 in–95 in (1.5 m–2.4 m)
- Left cutterbar shield is hinged for easy service access
80-degree Constant Velocity Joint
- Overload protection is standard
- Primary PTO uses an 80-degree constant velocity joint at the tractor end to permit tight turns, reduce noise and extend service life
- Standard tractor tire bumpers protect PTO driveline and tractor tires
Adjustable From 2-10 Degrees
Tilt is adjustable from 2–10 degrees using a mechanical turnbuckle.
Easy Transport
Attaching and detaching the mower from the tractor is easily accomplished with a simple clevis hitch . The TD102 can be pulled by lighter-weight tractors , as weight is pulled versus carried on a 3-point hitch.
- Transport width is just 10 ft 10 in (3,300 mm) when end shields are folded
- Removable parking jack stand is stored on top of tongue assembly
- Hydraulic tongue swing cylinder powers the unit from transport to operating position
- Has a 12-in (305-mm)-minimum cutterbar ground clearance in transport position
- Hinged right-side cutterbar shield folds up for narrow transport
- Safety tow chain standard
- Low transport height eliminates the need for implement lights
Specifications
| Make | Case IH |
| Model | TD102 Pull-Type |
| Mower Size | |
| Number of Discs | 8 |
| Position relative to Tractor | Trailing, side-pull |
| Cutter Bar | |
| Cutting width, ft in (m) | 10' 4" (3.15) |
| Swath width, ft in (m) | 7' 11" (2.41) |
| Cutting height, in (mm) | 0.95-3.2 (24-81) |
| Mowing arc, +/- from horizontal, degrees | Trailing wheels follow ground |
| Breakaway angle, degrees, or description | Breakaway latch, spring-loaded |
| Discs | |
| Knives per disc | 2 |
| Disc speed, rpm | 3000 |
| Disc cutting diameter, in (mm) | 19.7 (500) |
| Drive between discs, bevel or spur gear | Bevel gears in sealed modules |
| Tractor Requirements | |
| Tractor horsepower hp (kW) | 60 (45) |
| PTO rated speed, rpm | 540 |
| Three-point hitch category, or drawbar | Pin to drawbar |
| Hydraulic circuits required | Two (one single, one double-acting) |
| Dimensions and Weight | |
| Transport width, ft-in (m) | 10' 10" (3.30) |
| Transport length, ft-in (m) | 15' 8" (4.78) |
| Transport height, ft-in (m) | 5' 2" (1.57) |
| Weight, lb (kg) | 2,610 (1186) |
| Trailing Tires | |
| Trailing tire size | 27x9.5-15, 6PR |
| Sales Literature | |
| Literature number | CIH7180803 |
| Literature date | 2009 |
| Other Documentation | |
| Document number | -- |
| Document date | -- |
| Entry Date | |
| Manufacturing Status | Current |
| First Entry Date | 12/15/2008 |
| Revision Date | 6/20/2013 |
