Case IH RD193

Double tap to zoom

Disc Modules: Rugged and Easy Service, Repair or Replacement

Individually sealed bearings , gears and lubricant – damage or contamination to one disc doesn't spread to another
Complete gear lubrication , even when cutting on slopes or at an angle
Austempered discs for extra hardness and durability in punishing conditions
A protective liner in the hood helps reduce rock damage
Heavy-duty gears and cross shafts

Protects key disc module drive components when a disc encounters a field obstacle
Easier in-field repairs
Dramatically reduces downtime
Lower replacement-part cost
Standard on all rotary disc header models

One-bolt knives that are reversible for twice the cutting life
A knife speed of 187 mph (301 kph)
A cutterbar angle that adjusts hydraulically from 2–10 degrees below horizontal using the in-cab switch

Perfect for large-scale commercial growers — delivers unbeatable speed
Industry-leading cutting width — 19.3 ft (5.9 m)
Compatible — WD2303
Full-length auger eliminates the need for co-rotating discs and increases cutoff performance

Make	Case IH
Model	RD193
Disc Header
Cutting width, ft in (m)	19' 4" (5.89)
Conditioner type, Roll or Flail	Roll
Conditioner Removable or can be omitted	Yes
Overall header width, ft in (m)	19' 5" (5912)
Cutting height range, in (mm)	0.7 to 3.5 (18 to 89)
Cutter bar angle range, degrees	0 to 10
Header drive	Hydrostatic, two drive motors
Flotation	Hydraulic
Weight, lbs (kg)	5,100 (2313)
Disc Cutterbar
Number of discs	12
Knives per disc	2
Disc cutting diameter, in (mm)	24.3 (618)
Disc drive components	Bevel gearsets in individual sealed modules
Disc speed, rpm	2500
Disc blade tip speed, mph (kph)	181 (291)
Crop movement, cutterbar to conditioner
Transition description, cutterbar to conditioner	Full width auger w/ discharge paddles
Conditioner
Roll / Rotor length, in (mm)	102 (2591)
Roll / Rotor diameter, in (mm)	10.375 (264)
Roll / Rotor speed, rpm	938
Roll / Rotor material, standard	Rubber
Alternate roll material	Steel or High-contact urethane
Roll surface pattern, standard	Chevron intermeshing
Roll pressure system	Torsion bar
Roll adjustment method	Crank
Windrow/swath width, in (mm)	38 to 96 (965 to 2438)
Sales Literature
Literature number	CIH07211103
Literature date	7/1/2011
Operators Manual
Manual number	HF-5124-10
Manual date	9/1/2010
Manufacturing status	Current
First Entry Date	3/1/2012
Revision Date	--

Widget Title