Great Plains TCN5107
In the fall, vertical tillage eliminates the soil’s density layers, leaving it ready for a one-pass tool before spring planting. Turbo-Chisel is engineered to size and incorporate residue into the top 4-5" of soil, while leaving the surface level enough for a single-pass tool in the spring. The Turbo-Chisel is available in 14 sizes, with a choice of shanks and optional rear attachments.
Turbo-Chisel starts by slicing residue with exclusive 22" Great Plains Turbo Coulters on 7½" spacing. Blades run on a 1¾" gang bolt with cast spools, putting the weight “in the gang” for outstanding performance and reliability. Gang bearings are field-proven, PEER® Maintenance-Free 211 Bearings with cast housings mounted to heavy-duty 1" x 3" C-shank standards. Plus, Turbo-Chisel’s coulter depth is hydraulically adjustable for on-the-go depth control.
This machine is offered in rigid 7-15 shank models or folding 9-23 shank models, with a recommended horsepower requirement of 30 hp per shank. Units can be equipped with optional chisel shanks, as well as optional Great Plains chopper wheels to crumble clods while leveling soil.
While there are other coulter chisels available on the market, there is only one Turbo-Chisel!
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
Features
CHOOSE PARABOLIC OR CHISEL SHANKS
Order the Turbo-Chisel the way you want it with two different shank combinations: standard chisel (left) or heavy-duty parabolic toggle-trip shanks (right). Parabolic toggle-trip shanks perform up to 12-inches deep, while the maximum depth of the chisel shanks is 9 inches. When equipped with heavy-duty parabolic toggle-trip shanks, this unit works in the mid-ranges of 8" to 12", requiring less horsepower than competitive disk rippers that run in the 13" to 15" range – while horizontally fracturing soil much better than a disk chisel. Toggle-trip shanks either run at the set depth or trip – there is no in-between. Toggle-trip shanks have 2,450 lbs. of trip force while chisel shanks have 900 lbs. of trip force.
EXCLUSIVE 22" TURBO BLADES
On 7½" spacing, the 22" Turbo blades enter the soil vertically and leave horizontally, causing a mulching action of both soil and residue while maximizing lateral fracture. Competitive concave-disc tools simply cut off and roll long stringy stalks.
ADJUSTABLE COULTER DEPTH
Independently control coulter depth from the cab. This allows the operator to make adjustments to the depth based on field conditions.
SINGLE-POINT DEPTH STOP
Adjust the depth across the entire width of the machine in one convenient place.
VIRTUALLY MAINTENANCE FREE BEARINGS
New 7-lip TillXtreme™ seals on each side of the gang bearings lock in grease and prevent contamination. Additionally, the walking beam pivots utilize coated bushings, eliminating the need for tapered bearings and grease in pivot points. Drop axles pivot on anti-rotational pins, requiring no maintenance.
WALKING TANDEM AXLES
Maintain consistent mainframe height for accurate, consistent tillage depth control.
OPTIONAL CHOPPER WHEEL REAR ATTACHMENT
Patented angled chopper wheels pull dirt back into shank voids, leveling soil while maintaining the vertically-tilled profile left by the shanks.
OPTIONAL REAR HITCH
Variety of configurations tow cover crop, nutrient application, and other light-duty attachments.
OPTIONAL BUSTER BAR REAR ATTACHMENT
Levels and smooths the soil.
OPTIONAL COVERING WING WITH WEAR PLATE
Buries more residue and creates a darker soil surface.
| MODEL | TCN5107 |
| SHANK SPACING | 15" |
| COULTER SPACING | 7.5" |
| NUMBER OF SHANKS | 7 |
| NUMBER OF COULTERS | 15 |
| TRANSPORT TIRES | 12.5Lx15 12-ply (4) |
| WEIGHT (approx lbs) | 9,970 |
| ENGINE H.P. REQ (min) | 150+ |
| DIMENSIONS | |
| TILLAGE WIDTH | 8' 9" |
| TRANSPORT WIDTH | 9' |
| TRANSPORT HEIGHT | 5' 9" |
| TILLAGE INFO | |
| CENTER SECTION | 9' |
| 1ST WING SECTION | N/A |
