SnowEx 31614 (10' x 30")
No Trace of Snow Left Behind
When you commit to clearing a lot, your clients expect to see pavement. The SnowEx® POWER PUSHER™ fixed wing pusher plow is your go-to for maximum efficiency with zero fuss. This pusher moves massive amounts of snow and scrapes down to the pavement, so you can save time and money on salting. Its TRACE™ edge technically allows its independent 2-foot sections to follow the contours of the pavement to remove as much snow as possible with every pass. A simple, fixed-wing design means you can clear lots fast with limited moving parts to strand you in the early morning hours.
Compatible with Skid-Steers, Tractors & Wheel Loaders
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
Features
TRACE Edge Technology
The terrain-response advanced cutting edge is comprised of independent, 2′ sections that raise, oscillate, and trip to accommodate contours and obstacles in the plowable surface. Working together, the sections remove more snow, reducing the amount of salt required. Two greasing locations allow the operator to keep the components well lubricated for maximum performance.
Common Attachment Plate
A common attachment plate with a floating coupler makes installation easy with a wide variety of equipment and machinery, including skid-steers, wheel loaders, backhoes, and tractors. The floating coupler reduces negative down pressure from the vehicle, protecting against premature wear of the pusher cutting edge and components.
Easy Operation
Operation of the POWER PUSHER plow is conveniently tied into the equipment’s controls. Simply raise and lower the lift arm and angle the attachment plate to position the pusher in the correct orientation.
Structural Brace
Braces are included for increased strength and stability allowing the POWER PUSHER to carry and stack and even more snow.
Self-Leveling Side Plates With Reversible, Bolt-On Shoes
The side plates ensure the TRACE edge remains in direct contact with the plowable surface. The reversible, bolt-on shoe makes serviceability easy, allowing you to use both edges of the shoe before replacing. The bolt-on design makes replacement in the field possible with a ¾” socket, ratchet, and 3/4″ wrench.
3/4" Cutting Edge With Carbide Inserts
The POWER PUSHER plow withstands the most grueling commercial snow removal conditions. Each 2′ section comes standard with a 3/4″ cutting edge with carbide insert that extends the life of a high-carbon blade up to 20 times. And each section uses the same part number for easy replacement. No need to replace the full cutting edge, only the sections that show wear.
Modular Design (14’ & 16’ Widths)
When you purchase a 14’ or 16’ width pusher, you gain the advantage of two plow widths in one pusher. Remove the bolt on 2’ extensions on each end of the pusher to transition a 16’ into a 12’ option or a 14’ into a 10’ option. This increases flexibility for multiple property types that may benefit from a smaller pusher that is easier to maneuver.
*Some assembly/disassembly required.
| MODELS | 31614 |
| BLADE SIZE | 10' x 30" |
| MOLDBOARD OPTIONS | Powder-Coated Steel |
| BLADE TYPE | Pusher |
| VEHICLE COMPATIBILITY | Skid-Steer |
| APPROX. WEIGHT* | 2,895 lbs |
| HORSEPOWER COMPATIBILITY | 60+ hp (Skid-Steer) |
| BLADE WIDTH | 10' |
| BLADE HEIGHT | 30" |
| SIDE PLATE WIDTH | 36" |
| SIDE PLATE HEIGHT | 30" |
| MOLDBOARD RADIUS | 27" |
| APPROX. SNOW CAPACITY | 94 cu ft |
| CUTTING EDGE TECHNOLOGY | TRACE — Terrain Response Advanced Cutting Edge |
| CUTTING EDGE MATERIAL | High-Carbon Steel With Carbide Inserts |
| MOUNT TYPE | Skid-Steer Attach Plate |
*Does not include vehicle mount weight.
