SnowEx P150C (89810)
SPREADING YOUR WAY
Based on the material your operation most commonly uses for de-icing, the SnowEx® Renegade line offers the best material delivery system for you. The polyethylene construction and integrated lid system allows you to protect your
de-icing material as you complete your service routes.
Compatible with Trucks
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
Features
Polyethylene Construction & Geometry
Resist the corrosive environment of de-icing with polyethylene construction. Lightweight, yet highly durable, these hoppers are built to last. The molded polyethylene tub geometry is optimized for better material flow. This allows for a smoother, even flow that prevents materials from getting stuck.
HELIXX™ Auger Technology
Patented corkscrew material delivery system is optimized to operate in the target range for rock salt spreading best practices. The auger has multiple pitches to help promote smooth, even material flow from the hopper and prevents bridging. The shaftless technology reduces drag on the motor and reduces the overall load on the electrical system.
* Auger Models Only (P150A & P220A)
Pintle Chain Conveyor
The large conveyor delivers reliable, smooth, and consistent material flow for heavy, dense materials (like sand and 50/50 mix) while reducing bridging.
* Chain Models Only (P150C & P220C)
Interlocking Poly Lids
Standard lids have molded channels for moisture runoff. Pockets at the end of the lid allow a 2×4 to be inserted for leverage while opening.
Stand On End
Special design allows the hopper to stand on end for easier storage in the off-season and easier installation into the truck bed. Simply remove the two pins, unplug it, and take off the chute before standing up the hopper.
Extended Material Delivery & Pre-Wet Chamber
A material delivery extension reduces leaking/ spilling during transport and leads into the patented pre-wet mixing chamber. It also provides a cab-forward design for added stability and weight distribution of the hopper.
* Pre-wet accessory sold separately
Optimized Spinner Channels
The ridges on the spinner ensure an even distribution of material throughout the spread arc. The spinner is 16” diameter and can spread salt up to 36’ and sand up to 24’.
Chute Power Plug
Heavy-duty, weather-resistant plug is IP-68 rated. Positive latching ensures a secure connection, even with vibrations caused by consistent travel. The plug has been tested to 5,000 mating cycles for durability for many winter seasons to come.
Common Part Chute Design
The ergonomic, hinged design uses fewer components for all models, making service easy. A direct-drive motor offers better torque and reduces servicing.
Swing Away Chute Assembly
Remove the pin, unplug it, and swing the chute from the the driver’s side to the passenger side, providing easy access for maintenance or material unloading. The chute assembly can also be removed for convenient access to the hitch or to stand the hopper up on end during storage.
Material Spill Protector (Chain Models Only)
A protection flap at the end of the conveyor prevents material from spilling out and pooling near the vehicle cab.
* Chain Models Only (P150C & P220C)
| Models | 89810 |
| Capacity (Volume) | 1.5 cu yd |
| Smart Model Number | P150C |
| Vehicle Compatibility | ¾ & 1-Ton Pickup, Dump Body, Flatbed, or 15,000+ GVWR Truck |
| Material Compatibility | Bulk Salt, Bulk Sand, 50/50 Mix, Pre-Wet* & Liquid Brine* |
| Capacity (Volume) | 1.5 cu yd |
| Capacity (Weight) | 3,240 lb |
| Spreading Width | Salt: Up to 36' Sand: Up to 24' |
| Approx. Weight** (Empty) | 723 lb |
| Hopper Length (A) | 96.50" |
| Length from Cab Side to Second Leg (B) | 80" |
| Overall Hopper Length (C) | 108.25" |
| Width of Hopper Opening (D) | 63.50" |
| Height of Hopper w/o Chute (E) | 46" |
| Body Side Length | 7' |
| Rec. Bed Length | 74" |
| Material Delivery Dimensions | 16" Wide |
| Hopper Construction | Polyethylene Body, Stainless Steel Drive Line |
| Spinner Size | 16" Diameter |
| Factory Chute Configuration | Short |
* C = Pintle Chain Conveyor / A = HELIXX Shaftless Auger
* Accessory required for pre-wet and liquid brine
** Material weight equates to approximately 2,160 lb/cu yd or 80 lb/cu ft for 1 bag of rock salt.
