Snow Plows 6000 UTV V-Plow

Double tap to zoom

 

Features

Vertical Reinforcement Ribs
Six vertical ribs support the back of the blade to add additional strength and protect it against twisting.

Lightweight Design
The blade is constructed of high-strength, low alloy steel components that are stronger and lighter than traditional steel.

Trip-Edge Protection
Independent trip edge protects the plow, UTV and operator when encountering obstacles, and functions in any position (scoop, V, angle or straight). Because only the edge trips, snow loads are never lost.

Responsive Direct Lift
The direct lift system includes a massive cylinder that delivers a wide range of motion, impressive lifting power and high stacking performance.

Standard Double Acting Cylinders
Allows operation of each wing independently or to lock the wings together for efficient straight blade operation and clean back dragging.

Easy Access Components Cover
Hydraulic components are protected with a durable poly cover that is easy to remove for quick maintenance access.

Hand-Held Controls
Choose between the joystick control for easy blade control operation when wearing gloves or the POWER GRIP™ control with backlit buttons. Both feature power “on” and float LEDs and are FLEET FLEX enabled.

Windrowing Position
When angled for windrowing, the leading wing directs more snow into the moldboard to eliminate spill-off. Adjustable to 5'0" or 5'6" widths.

BUCKET BLADE™ Scoop Position
In order to put the plow in scoop mode, you'll need to angle the wings forward. Adjustable to 4'7" or 5'1" widths.

V Position
By angling the wings backwards, you can put the plow in V position. Adjustable to 5'0" and 5'6" widths.

POWERCOAT Finish
Our high-performance, multi-stage powder coat system provides a long lasting, maintenance-free finish.

Adjustable Center Cutting Edge
Gap can be adjusted to help prevent snow from slipping between pivot edges.

Robotically Welded Headgear
Headgear that is welded robotically ensures that the quality is consistent for all SnowEx plows.

Stand-Free Design
Because the blade is stable in the V position for either attaching or detaching, no stand is needed.

Self-Aligning Receiver Brackets
Receivers simplify attachment and are removable when not in use. This enhances ground clearance and ramp angle when using the vehicle during other seasons or when not plowing.

Pre-Punched Blades for Accessories
The blade is pre-punched for easy installation of accessories, providing a custom fit. The pre-punched holes also prevent damage to the powder coat that can sometimes occur when installing an accessory.

Specifications

Model 6000 UTV V-Plow
Blade Width 6' 0"
Blade Height 25.75" at hinge/29.25" at end
Angle Cylinders 1"
Plowing Width (Straight) 72" - Straight - 84" w/Wings
60"/66" - Vee - 67"/73" w/Wings
55"/61" - Scoop - 61"/67" w/Wings
Plowing Width (Full Angle) 60"/66"
67"/73" w/Wings
Approx. Weight* 354 lbs.
Cutting Edge 1/4" x 5"
Construction 
Blade/Wing Thickness 14 ga
Reinforcement Ribs 6
Trip Springs 2 steel

VIEW ALL OUR LAWN & GARDEN EQUIPMENT FOR SALE