Stihl STIHL ROLLOMATIC® ES Light 3/8"
A guide bar that has 30% less weight in comparison with STIHL ROLLOMATIC® ES Super guide bars.
- Get a Quote
- Send to a Friend
- Payment Calculator
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
Features
The STIHL ROLLOMATIC® ES Light guide bar has up to 30% less weight in comparison with STIHL ROLLOMATIC® E Super guide bars. In order to reduce weight, long channels are milled out of the center of a solid guide bar, then a thin steel plate of the same steel is welded over the channels using a special laser welding process. The reduced weight helps decrease operator fatigue, especially on longer bars. A replaceable sprocket nose assembly is also incorporated in the nose of the bar that carries the saw chain from the top to the bottom of the bar. This not only reduces wear, but also enables the bar nose to be made considerably narrower. All STIHL ROLLOMATIC® bars designed with a narrow nose help reduce kickback tendencies. And the sprocket nose assembly can be replaced several times before the whole bar is due for replacement, increasing the guide bar’s service life.
Applications: For high-performance woodcutting with larger displacement professional STIHL chainsaws.
STIHL recommends using low-kickback, green-labeled chain and green-labeled reduced-kickback bars on all powerheads.
Note: The actual listed guide bar length can vary from the effective cutting length depending upon which powerhead it is installed.
| Sprocket nose pitch | 9,32mm/3/8" |
| Groove width | 1,6mm/.063" / 1,3mm/.050" |
| Bar tail | 3003 |
| No. of teeth, sprocket nose | 11 |
| Bar length | 50cm/20" / 63cm/25" / 71cm/28" / 80cm/32" / 90cm/36" |
| Bar weight | 0.916 / 1.168 / 1.263 / 1.489 / 1.643 / 0.940 / 1.209 / 1.308 / 1.542 / 1.701 kg |
Contact Us
-
824 US-42
Ashland, OH 44805
419-289-3610 -
6080 Norwalk Rd.
Medina, OH 44256
330-725-4951 -
625 South Main St.
Wellington, OH 44090
440-647-3725
© Copyright 2026 | All Rights Reserved. Site by EquipmentLocator.com
Business Policies | Privacy | Terms | Sitemap